Before You Start
Helpful Tips Before Starting:
Use a steel tape measure for precise measurements.
Determine your window mounting style:
• Inside Mount: Fits within the window recess for a clean, streamlined look.
• Outside Mount: Extends beyond the window frame to cover the entire area.Verify your package contains all necessary screws, mounts, and hardware before starting installation.
Tools You Will Need
Make sure you have the following tools on hand:
- Measuring Tape
- Level tool
- Screwdriver
- Drill
- Step Ladder (if necessary)
Installation Steps
Select your customized installation category below to access full instructions on installing your blinds or shades.
How to Install Inside Mount Blinds or Shades
Position the first bracket at the upper corner of the window frame, flush with the wall surface. Refer to your product manual for exact placement, especially if your blinds include a decorative valance.
Mark the screw holes with a pencil.
Repeat for the second bracket at the opposite corner. Use drywall anchors if you’re mounting into drywall without studs.
Use a steel tape measure or level to ensure both brackets are evenly aligned.
Drill pilot holes slightly smaller than your screws at the marked spots, then securely fasten the brackets.
Slide the headrail of the blinds into the brackets and lock it in place by closing or snapping the brackets, based on the design.
Test the blinds by lowering, raising, and rotating them to confirm smooth operation.
For additional assistance, contact us to access the specific installation video for your product.
How to Install Outside Mount Blinds or Shades
Position the first bracket in the upper corner of the window frame, flush with the wall surface. Consult your product instructions for exact placement.
Mark the screw locations with a pencil.
Repeat for the second bracket at the opposite corner. Use drywall anchors if mounting into drywall without studs.
Use a steel tape measure or level to ensure brackets are evenly aligned.
Drill pilot holes smaller than your screws at the marked spots, then secure the brackets in place.
Slide the headrail into the brackets and lock it by closing or snapping, depending on the style.
Test the blinds by lowering, raising, and rotating them to ensure proper operation.
For assistance, contact us to access the relevant installation video.
If you encounter any issues, feel free to contact us. Our expert team is ready to assist with measurements and installation.
